The machine tool sheet metal protective cover is the traditional form of protection for machine tools. It is widely used in this field and plays an effective role in preventing the entry of chips and other sharp objects. Through certain structural measures and suitable scraping plates Can effectively reduce the penetration of cooling liquid.

       The protective cover can meet the increasing demands of modern machine tools for high technology, correct installation position, high running speed and so on. Many machine tool sheet metal shield sheet metal parts are welded together by spot welding, oxygen welding, arc welding or gas shielded welding, etc., so the sheet metal parts must have good welding performance, which is in automobile repair repair Especially important, materials with good weldability have high welding strength and little tendency to crack.

For any component of an automobile, economic efficiency should be considered when working conditions are met. Ferrous metals can be used instead of non-ferrous metals; non-ferrous metals can be used without precious metals. The service life of the machine tool shield sheet metal components should be compatible with the life of other car components. It has good chemical stability. The machine tool shield covers are mostly operated in the open environment, often in contact with water and steam, especially like mufflers, Often work at higher temperatures and corrosive gases, which requires that the sheet metal parts must have good chemical stability, not only corrosion resistance at room temperature, strong rust resistance, but also not to be corroded under high temperature or sun exposure, Not deformed.

There is a certain difference between the design of machine tool sheet metal shield products and the design of electric consumer products. The size of the machine tool is large, the design level can be pulled apart, the room for play is large, and the processing of the body relationship is more important. The overall trend is more concise and international, and the corporate image is emphasized, rather than designing a male model that is randomly modified. The material is basically a sheet metal part, and the mold is rarely opened. The product pays attention to the far-sighted and big visual feeling. The details of human-computer interaction.

The protective cover adopts a stainless steel door shaft, a dual-source terminal box handle, and a limited position and anti-rebound mechanism are installed inside the door; the lead knockout hole is improved to a "I" shape detachable structure, which facilitates the introduction of cables; machine tool sheet metal The protective cover is made of imported stainless steel material, which has good strength, high hardness, beautiful surface, good sealing, strong corrosion resistance, long life and easy maintenance. The design characteristics of the cabinet are made of imported stainless steel materials, which have good strength, high hardness and beautiful surface. , Good sealing, strong corrosion resistance, long life and easy maintenance, is an ideal replacement product.

A buffer system is also needed between the driving plate, scraping plate and suction plate of the steel plate shield of the machining center, the purpose is to reduce bumps, noise and interference. The number of sections of the steel shield is important for its proportion, weight and working characteristics.

   When the width of the steel plate shield is large, it is necessary to fold the edges and advance the lateral stability. Both the roof crest type and the hemming can be done. The inclined type can make the liquid and debris flow away automatically. The steel plate protective cover has a good seal, which can prevent iron filings, coolant, and accidents. It is based on the original sealing strip, and a layer of stainless steel cover is added to prevent the iron scraps from burning into the rail surface. Strain the guide rail, suitable for high-speed motion machine tool guide rail protection is stable and no vibration noise.

   The steel plate protective cover is durable, stable in operation, low in noise, and beautiful in appearance. It will not disjoin the guard plate and have a knocking sound. It is beautiful and extends the service life. It not only protects the service life of the guard plate, but also ensures the precision of the machine Degrees, each section of the guards swing out in parallel, and retract together in parallel, working freely.

Benefits of steel plate shield equipment: 1) Make the shield move in parallel and parallel. 2) The protective cover of the equipment can be used to increase the service life. 3) The moving speed of the shield can be increased to 120m / min and withstand a higher G value (2G). 4) Each piece of the shield can move simultaneously with each other, which is completely different from the general shield one by one pull type, so the noise is extremely low. The processing methods of the steel shield of the machining center are mostly shearing, bending, and punching. Because these methods use molds during the processing of the shield, each time a product is consumed, it needs to be not less than dozens of configurations The set of molds is not only not conducive to the precise processing and change of the machine tool shield process, but also increases the time and money used in the production process of the machine tool shield process, so that the consumption efficiency is significantly reduced.

The steel sheet protective cover can meet the increasing demands of modern machine tools for high technology, correct installation position, high running speed and so on. The protective cover is formed by cold pressing of high-quality 2-3mm thick steel plate, and it can also be stainless steel according to the requirements. Special surface polishing will make it additionally appreciate. We can provide the corresponding guide rail protection type (horizontal, vertical, inclined, horizontal) for all types of machine tools, the number of sections is very important for their proportion, weight and operating characteristics, each single section should be as long as possible, so that Reduce the number of nodes and reduce the cost. Generally, the ratio of large stretch to small compression should be between 3: 1 and 5: 1.

   The steel plate protective cover is well sealed, and can prevent iron filings, coolant, and accidents of tools. Sturdy and durable, stable operation, low noise, beautiful appearance, suitable for high-speed movement machine tool rail protection is both stable and free of vibration and noise, not only protects the service life of the guard plate, but also ensures the precision of the machine tool. Pull it apart and retract it in parallel at the same time. It runs freely, does not disengage the guard plate, and there is a knocking sound, which is beautiful and improves the service life of the guard plate.

   A layer of stainless steel cover plate is added on top of the original sealing strip to prevent the iron scraps from being burned into the rail surface by high temperature and scratching the rail. Processing advantages of steel plate shield: 1. Each piece of the shield can move at the same time, which is completely different from the general shield one by one pull type, so the noise is low. 2. The protective cover of the device can increase the service life. 3. The steel plate shield device can make the shield moving speed to 120m / min and withstand higher G value (2G). 4. The device keeps the shield moving and parallel. 5. It can be more stable at high speed without vibration.

1. Steel plate protective cover is suitable for high-speed movement machine tool rail protection, which is stable and free of vibration and noise. (Speed can run normally under 80m / min)
 

2. Each section of the steel plate shield is pulled out in parallel and retracted in parallel at the same time, so it runs smoothly.
 

3. The steel plate protective cover will not make the protective plate out of joint, and there is impact sound, which is beautiful and improves the service life of the protective plate.
 

4 steel plate protective cover is covered with a layer of stainless steel cover plate on the basis of the original sealing strip to prevent iron scraps from high-temperature burn and the strip from rubbing into the rail surface and pulling the rail.
 

5. Steel plate protective cover This device not only protects the service life of the protective plate, but more importantly guarantees the precision of the machine tool.KEALAKEALAKEALA