Two aspects that cannot be ignored in the waterproof connector of stainless steel cantilever assembly
The first point: the mechanical properties of the waterproof connector
In terms of insertion force and withdrawal force, the insertion force and withdrawal force of the waterproof connector must meet the corresponding rigid standards. When we install the waterproof connector, the insertion force is too high, which will cause insertion difficulty, which is very difficult, and if it takes a long time, it may bring safety risks to the entire machine.
For the pull-out force, this requires a relatively large pull-out force relative to the insertion force. If the pull-out force is too small, even after the waterproof connector is connected, it will easily fall off, which will also affect the service life of the waterproof connector.

The second point: the applicable environment of the waterproof connector
When choosing a waterproof connector, you must pay attention to its applicable environment. The working temperature range and working humidity range of the waterproof connector must be greater than the working temperature and humidity of the device. In terms of high temperature resistance, a high-quality waterproof connector must be able to work normally under its standard high and low temperature indicators, and its parts and performance cannot be affected or damaged due to the temperature. In the choice of humidity, excessive humidity will affect the insulation performance of the waterproof connector, so the humidity of the environment should also be considered when selecting, whether it will affect the use of the waterproof connector. Another very important indicator of waterproof connectors is shock resistance and impact resistance and extrusion. This point is more thoroughly reflected in aerospace, railway and road transportation. The connector needs to have a very sturdy, very shock-resistant function, and it can maintain normal work in some harsh working environments. At the same time, it also needs to be able to maintain normal work under huge impacts without causing damage.

When buying waterproof connector cantilever components, some customers may think that the more complex the production process, the better, the more complex the process, the stronger the waterproof ability, simple things are not good, complex things are better. In fact, when buying a waterproof connector, don't think that the more complicated the production process, the better. Only the things that really suit you, the better.

The production process is just a different way of production. For customers, it is not necessary to pay attention to whether the production process is more complicated. Often the more complicated things are more likely to have problems. Simple things are easier to standardize and process, and it is more possible to find the problem in the first time in the production process. All issues must be considered in light of the actual situation, and you must not just give up on some things and your own standards. When buying a waterproof connector, many issues must be fully considered. The production process is not as complicated as possible. It is recommended that every customer who intends to purchase a waterproof connector pay attention to the specific details.